The Pilot
A premium range of inflatable boats
The Pilot 3.65m Crossover Kayak
Details
Length: 3.65 m
Exterior Width: 1.1 m
Interior Width: 430mm
Tube Diameter: 320mm
Air Chambers: 4+ Air Floor
Maximum Load: 225kg, 1 - 3 persons
Weight: (boat in the bag- 31 kg)
Maximum HP: 6 (4 stroke)
Recommended HP: 2.5-6 hp
Shaft length: Short Shaft
BOAT IN BAG Dimensions: 36" x 26" x 11"
Durable and Exquisite
The ever popular 3.65 meter Pilot is made of the latest generation 1100 denier (0.9mm) PVC reinforced fabric with polyester support which offers excellent abrasion and tear resistance. As each seam is hand glued with four layers of bonded fabric it offers maximum strength and durability. Two sheets are overlapped and glued before two re-enforcement layers are attached either side.
Glued seams offer better durability to welded seams when the PVC product is designed to be inflated and deflated on a regular basis. Our choice of fabric and seam design means Xcape Marine boats are built tough and designed to last.
Floor
Using Air-deck technology the Air Floor is an integral part of the boat design. It offers rigidity to the boat design and gives you great stability. Our lightweight, removable high pressure air floor system is constructed using the latest drop stitch technology. You will find the same technology being used in many inflatable paddle boards. This system is comprised of thousands of interwoven stitches holding both sections of fabric in parallel. Once inflated, this system provides extreme rigidity to the boat and ensures set up and pack down is easy and quick. The air floor’s construction also absorbs vibrations and is comfortable underfoot and once inflated is extremely rigid. When deflated the air mat is rolled up for ultimate portability.
Seating
The Pilot optimises it’s size by utilising adjustable sliding seats. This enables the occupants to maximum leg room or storage room if alone.
5x Valves
When our in-house team design our range of boats safety is always our main focus. Using quality valves is imperative, so our whole range of inflatable boats and Kayaks utilise Halkey-Roberts valves designed for easy inflation and deflation. The Pilot boasts 5 air tight inflation compartments including the floor, which greatly enhance the safety of the craft.
Having extra compartments will maintain stability in the unlikely event of losing pressure in any of the compartments. All valves have a double seal for leak protection and are widely used by quality inflatable boat manufacturers.
Internal Bung System
The Explorer has an internal bung system which can be opened and closed from onboard and allows easy draining of any unwanted water.
Transoms
The transom is made with marine plywood and coated with tough 0.9mm, 1100 Denier PVC fabric then fitted with outboard / electric motor protection plates.
Maintenance
Our boats require very little maintenance. However we recommend the following to maximize the lifetime of your boat:
Always rinse your boat off with fresh water after use in salt water. If storing your boat outside for several days ensure it is covered and out of direct sunlight. Xcape Marine boats can be stored inflated or deflated. If inflated we recommend using a boat cover. If deflated we recommend using the carry bag provided.
Our PVC material is extremely durable however avoid sharp objects or highly abrasive materials. We do not recommend using solvent or chemical based cleaning agents on your Xcape Marine Boat.
Your local marine store will be able to recommend PVC inflatable boat cleaner.